On 7/28/2023 Arrived and started checking unit.. found pressures too low for 404a and started looking for leak...found two pinhole leaks on EVAP and soldered them .. added 2.5 lbs. of 404a to bring up pressures to 72/315 and felt box dropping temp and verified temp drop … For future reference I got model and…
Read moreunit is run by dixell controller
On 7/27/2023 Arrived and found unit iced up...unit is run by Dixell controller I unplugged controller and compressor was still running come to find that someone was here prior to us and wired compressor direct and the controller was not working either .... I rewired everything as it should go and verified defrost was cycling…
Read moreReplacing Expansion Valves
On 7/26/2023 pumped down units and started replacing expansion valves. Had to move product around to get to valves but after replacing pulled a deep vacuum and started working on the big cooler. In the big cooler I adjusted fan speed for one motor and got temp to start dropping as one of the fans…
Read moreCondenser Motor No Good
On 7/25/2023 Diagnosed unit found condenser motor no good and proceeded to replace after replacing turned unit and watched it reach temp in Carrollton Texas. Near Meadow Dr Carrollton, Texas 75007 Check out the Areas We Serve and jobs we are doing by clicking https://dallas.prorefrigerate.com/areas-we-serve/ [spacer][SHORTCODE_ELEMENTOR id=3540]
Read more